Italiano 
Français 
Deutsch 
Español 
polski 
简体中文 
FLEX version 5.9.0.0 is ready
Magicmotorsport releases new solutions for OBD programming of Bosch MED9.1.2 engine control units installed on Audi (R8 4.2 V8) and Lamborghini (Gallardo 5.2) cars. From today you can tune these cars directly from OBD socket, unlocking the ECU by OBD: perform the virtual reading, apply the changes and write the maps in just 11 minutes.
With version 5.9.0.0, FLEX is also able to read and write the Secondary CPU (if equipped) on all GETRAG 7DCT, BOSCH 9G-Tronic and ZF 8HP mechatronics. Thanks to this function it will no longer be necessary to re-align the mechatronics after a repair intervention. In summary, FLEX independently saves the content within the unit’s FullBackup and rewrites it without user intervention.
New BOOT and Bench solutions have been released with the latest FLEX update.
[ IMPORTANT! ] After this version, you will need to update your FLEX to the latest Software version 5.9.0.0. SW versions prior to 5.9.0.0 will no longer allow the use of the BENCH 4090000 protocol. If you have an older version of the software, FLEX will show the following message during the “Connect” option: “Internal server error. Contact technical support. Failed to connect.”
New protocols added:
- AUDI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
- AUDI SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash ; Read/Write IntEeprom ;Full Backup
- BUICK BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External Flash ; Read/Write External Eprom ; Full Backup
- CADILLAC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External Flash ; Read/Write External Eprom ; Full Backup
- FIAT BOSCH MD1CS069 BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Internal Eeprom ; Full Backup
- GMC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External Flash ; Read/Write External Eprom ; Full Backup
- HYUNDAI KEFICO CPGDSH1.26.1 BOOT: Read/Write/Checksum/Internal Flash ; Read/Write IntEeprom ; Full Backup
- KIA KEFICO CPGDSH1.26.1 BOOT: Read/Write/Internal Flash ; Read/Write IntEeprom ; Full Backup
- LAMBORGHINI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
- NISSAN BOSCH EDC16C41 BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External Flash ; Read/Write External Eprom ; Full Backup
- NISSAN BOSCH EDC17C45 BOOT: Read/Write/Checksum Internal Flash ; Read/Write/Internal Eeprom ; Full Backup
- OPEL BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External FLash ; Read/Write External Eprom ; Full Backup
- PORSCHE Continental SDI 7 BOOT: Read/Write Checksum Internal Flash ; Read/Write External Eeprom ; Full Backup
- PORSCHE Continental SDI 8 BOOT: Read/Write Checksum Internal Flash ; Read/Write External Eeprom ; Full Backup
- SAAB BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash ; Read/Write/Checksum External FLash ; Read/Write External Eprom ; Full Backup
- VINFAST BOSCH MG1CS088 BENCH: Read/Write Checksum Internal Flash ; Read/Write Internal Eeprom ; Full Backup
- Volkswagen (VW) BOSCH Simos 10.14A BOOT: Read/Write/Checksum Internal Flash ; Read/Write IntEeprom ; Full Backup
- Volkswagen (VW) SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash ; Read/Write IntEeprom ; Full Backup
Bug Fixes:
- Fixed issue with writing of external flash in BOSCH ME9.0 FORD & VOLVO
- Fixed no action error with 8GMF and TRW EMS2 protocol.
- VOLVO ME7.0 fixed writing issue in BENCH mode.
- Fixed BDM Internal Flash reading on different MCU types ( MPC55x )
Software improvements:
- Added support for BOSCH 9G-Tronic; ZF 8HP and GETRAG 7DCT SecondaryCPU ( The adaptation after clone in not needed anymore with any TCUs versions )
- Improved OBD writing on FORD BOSCH MEDG17.0
- Improved autodetection for Marelli Service Mode
