Nuove soluzioni Boot per Delphi di mezzi pesanti e vetture

Pronta la versione 6.31.0.0 di Flex

Rilasciato un nuovo aggiornamento sul software di Flex per la programmazione in modalità Boot di centraline motore Delphi installate su mezzi pesanti JCB, Landini Tractors, McCormick e su veicoli a marchio Kia, Hyundai, Mahindra, Volkswagen, Seat, Skoda, Great Wall.

Da oggi Flex supporta quattro nuove ECU:

• Delphi DCM2.7AP
• Delphi DCM3.7 VAG
• Delphi DCM7.1AP
• Delphi DCM7.24

Questi protocolli consentono la lettura e la scrittura dell’intero contenuto delle memorie Flash ed EEPROM e per Delphi DCM3.7 VAG il ripristino della ECU in caso di scrittura errata in OBD. Contattando l’assistenza tecnica sarà possibile eseguire la procedura di restore.

Ecco alcuni dei veicoli supportati:

• Hyundai i20 1.5L CRDi 100PS
• Great Wall Poer 2.0L Wingle 7 140PS
• Kia Seltos 1.5L CRDi 115PS
• JCB Wheel Loaders 2.5L 75PS
• JCB Telehandler 4.4L 75PS
• Landini Tractors Rex3 2.5L 55PS
• Mahindra Xuv 1.5L 115PS
• Seat Ibiza 1.2L TDI 75PS
• Skoda Fabia 1.2L TDI 75PS
• VW Polo 1.2 TDI 75Ps

Il nuovo protocollo è disponibile per i seguenti pacchetti software:DCM2.7AP – Boot

• FLS0.4M – SW Flex Boot Nexus MPC5xxx Master
• FLS0.4S – SW Flex Boot Nexus MPC5xxx Slave
• FLS0.5M – SW Flex Full Master
• FLS0.5S – SW Flex Full Slave

DCM3.7 VAG – Boot

• FLS0.5M – SW Flex Full Master
• FLS0.5S – SW Flex Full Slave
• FLS0.6M – SW Flex OBD/Bench/Boot Renesas SH7xxxx Master
• FLS0.6S – SW Flex OBD/Bench/Boot Renesas SH7xxxx Slave

DCM7.1AP – Boot

• FLS0.5M – SW Flex Full Master
• FLS0.5S – SW Flex Full Slave
• FLS0.10M – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Master
• FLS0.10S – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Slave

DCM7.24 – Boot

• FLS0.5M – SW Flex Full Master
• FLS0.5S – SW Flex Full Slave
• FLS0.10M – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Master
• FLS0.10S – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Slave

Nuovi protocolli aggiunti
(Boot)

• Mahindra Delphi DCM2.7AP MPC5642 Read/Write/Checksum Calculation Internal Flash

Reading Time: ~ 1.40 minuti  Writing Time: ~ 1.20 minuti

• JCB Delphi DCM2.7AP MPC5643 / MPC5644 Read/Write/Checksum Calculation Internal Flash

Reading Time:~ 1.40 minuti  Writing Time:~ 1.20 minuti

• VAG Delphi DCM3.7 SH72513 Read Full Backup, Write Recovery

Reading Time: ~ 15 secondi Writing Time: ~ 5 secondi 

• All Delphi DCM7.1AP  TC277 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time:~ 1.20 minuti  Writing Time: ~ 20 secondi

• JCB Delphi DCM7.24  TC277 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time: ~ 1.20 minuti  Writing Time: ~ 20 secondi

• JCB Delphi DCM7.24  TC297 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time: ~ 1.20 minuti  Writing Time: ~ 20 secondi

Risoluzione bug

• Added new CRC type for VAG Bosch MG1CS011
• Added new CRC type for VAG Continental Simos8.2
• Added new CRC type for Mercedes Continental MCM / ACM
• Added new CRC type for Land Rover Denso
• Added new CRC type for Ford Delphi MPC555
• Porsche Continental SDIx OBD – fixed issue which needed throttle reset
• BMW Exx Series OBD – fixed writing which cause OBD bricking for some SW versions

Miglioramenti software

• Improved Autodetection System in MCM / ACM protocols

Clicca qui per vedere la lista completa di veicoli supportati.